Stuart No.9 Horizontal Mill Engine

Dimensions: 11" length x 6" width x 6" height Stuart H9 with Flyball Governor Stuart Engines make extremely nice display pieces and this one is no exception. This motor was built by a gentleman by the name of Lou, in New York state. I acquired it when he broke up a personal collection of engines he had built in his hobby machine shop. Lou is a bit of an artist with tools and prides himself in having held this engine to within ±1/2 of a thousandth of an inch in tolerance to the blueprint specs. His talent really shines when you see the nice crisp clean edges and smooth contours on machine mirrored metal surfaces that are the touch of a master machinist. No hand polishing required for Lou's work. Here is the Flyball Governor that Stuart offers for the No.9 engine. It doubles as a guide for the slide valve linkage and is fully functional. This made it appealing to me, since it was a bit different from the usual mill engines I'd been seeing. The cylinder is jacketed in gun metal blue steel sheeting and, although attractive, doesn't look as if its going to fair well in the high humidity of the south without constant oiling. The sheeting may eventually be replaced by hardwood slats to make maintaining things easier. Sorry Lou...but may need to be done.
Cylinder and Governor Detail Another View I haven't connected this engine to a boiler yet. I will be designing the display for the full assembly in the near future and will post new photos when it is complete and running under power. The boiler I plan to mate to this engine is the larger version of the old style Stuart horizontal boiler with the flash heat tubes. It will be fired by a canister "torch" type burner from Stuart. I'm not satisfied with the burner, so I am looking for one of the old style square reservoir paraffin or alcohol tube type burners. HOME Stuart Beam - Reeves Tangye - Williamson - Stuart H9 - Stuart D-10 - Jensen 51 "Minnie" - Cretors D - Lewiston High - Radial - Elbow - Rectilinear - Curved Cylinder Böhm Stirling - Water Pressure - Coomber Rotary Toy Engines - Turbines Steam Links Jensen Steam Engine Store Antique Steam Engine store
Do You Have an Unusual Steam Engine to Sell? Email Information to
Historical Context of the Stuart No.9 Design
The Stuart No.9 horizontal mill engine occupies a special place in the lineage of model steam engineering. As a scaled representation of late Victorian industrial practice, it echoes the stationary engines that once powered textile mills, machine shops, and small factories across Britain and North America. The original full-size engines of this type were often built by firms such as Tangyes, Robey, or Belliss & Morcom, and they were prized for their reliability, simple maintenance, and smooth running under varying loads. Stuart Models, based in Guernsey, has produced castings and drawings for the No.9 for decades, making it one of the most recognizable projects for advanced hobby machinists.

What sets the No.9 apart from simpler oscillating or single-acting designs is its use of a slide valve with Stephenson or slip-eccentric reversing gear, a crosshead guide, and a substantial flywheel. The flyball governor, as fitted to this particular engine, is a direct nod to the automatic speed control systems developed by James Watt in the late 18th century. On a model scale, the governor is more than decorative; it modulates the steam admission through a linkage to the slide valve, reducing speed when the flywheel accelerates and allowing more steam when the load increases. This self-regulating behavior makes the engine fascinating to watch under load, as the governor balls rise and fall in response to changing conditions.
Lou’s decision to build the No.9 with the flyball governor option reflects a desire for both visual interest and mechanical authenticity. The governor is not a simple bolt-on accessory but requires careful machining of small parts, precise fitting of the linkage, and adjustment of the spring tension to achieve stable operation. The fact that Lou held tolerances to ±0.0005 inch across the entire engine speaks to his dedication and the capabilities of a well-equipped hobby machine shop. Such precision is rarely necessary for a display model, but it results in an engine that runs quietly, with minimal wear and a satisfying mechanical tightness.
Mechanical Operation and Steam Flow
Understanding how the Stuart No.9 works enhances appreciation of its construction. Steam from a boiler enters the engine through a throttle valve and then passes into the steam chest, which houses the slide valve. The slide valve, driven by an eccentric on the crankshaft, alternately admits steam to each end of the cylinder while exhausting the spent steam from the opposite end. This double-acting arrangement produces power on both strokes, giving the engine its characteristic smooth torque and relatively high efficiency for a model.
The crosshead and guide bar serve to keep the piston rod perfectly aligned with the cylinder bore, preventing side loads that would cause premature wear. The connecting rod transmits the linear motion of the crosshead to the crank pin, converting it into rotary motion. The flywheel, with its substantial rim mass, stores kinetic energy and carries the crank over the dead centers where steam admission is momentarily cut off. On a model like Lou’s, the flywheel is often machined from a solid casting or fabricated from bar stock, and its balance is critical for vibration-free running.

The flyball governor operates on a simple principle: as engine speed increases, centrifugal force causes the two balls to move outward, lifting a sleeve on the governor spindle. This sleeve is connected through a bell crank to the slide valve’s eccentric rod or a separate throttle valve, reducing steam admission. When speed drops, the balls fall, and steam flow increases. Proper adjustment of the governor spring and linkage geometry is essential; too much sensitivity leads to hunting, while too little makes the governor ineffective. Lou’s engine, with its mirror-finish governor parts, demonstrates that he spent considerable time tuning this mechanism for smooth, stable operation.
Boiler Considerations and Firing Options
The existing text mentions the plan to pair this engine with the larger Stuart horizontal boiler with flash heat tubes. This choice is logical, as the No.9 requires a steady supply of dry steam at moderate pressure, typically 30 to 60 psi for lively running. The flash tube boiler, with its multiple small-diameter water tubes, offers rapid steam generation and good response to changing demand. However, it is less forgiving of water level fluctuations than a conventional fire-tube boiler, so careful attention to the water gauge and feed system is necessary.
The original Stuart canister “torch” burner, while functional, has known limitations. It often produces a localized hot spot on the boiler shell, leading to uneven heating and potential warping over time. The old-style square reservoir paraffin or alcohol tube burners, as mentioned, distribute heat more evenly and are easier to control. They also have a nostalgic appeal that matches the engine’s vintage character. When selecting a burner, it is important to ensure that the flame pattern matches the boiler’s firebox dimensions and that the fuel is compatible with the wick or vaporizing system.
For display purposes, a small electric air pump can be used to simulate steam without the hazards of live firing, but nothing compares to the sight and sound of a true steam-powered engine. The gentle hiss of escaping steam, the rhythmic click of the slide valve, and the spinning governor create an immersive experience that draws viewers into the world of Victorian engineering. The planned display for this engine should consider ventilation, condensate drainage, and a stable base to prevent vibration from walking the engine across the table.

Materials, Finishes, and Maintenance
Lou’s choice of materials and finishes reflects both aesthetic and practical considerations. The gun metal blue steel sheeting on the cylinder jacket is visually striking, but as noted, it is vulnerable to corrosion in humid environments. Gun metal blue is a controlled oxidation process that produces a deep, lustrous blue-black surface, but it offers minimal protection against rust without a topcoat of oil or lacquer. In the southern United States, where relative humidity often exceeds 80% for months at a time, constant vigilance is required.
Alternatives to the steel sheeting include hardwood slats, as mentioned, which were common on full-size engines to provide insulation and a finished appearance. Woods such as mahogany, teak, or walnut are traditional choices, and they can be finished with boiled linseed oil or spar varnish for durability. Another option is to use thin brass or copper sheet, which develops a pleasant patina and resists corrosion better than steel. If the original sheeting is retained, regular application of a high-quality rust-preventive oil, such as Break-Free CLP or Ballistol, will help preserve the finish.
Beyond the cylinder jacket, the engine’s bright metal surfaces require periodic cleaning and oiling. The mirror finish achieved by Lou means that any fingerprint or moisture spot is immediately visible. A soft cotton cloth and a light machine oil are sufficient for routine maintenance. The slide valve, piston, and crosshead should be lubricated with steam cylinder oil, which is formulated to resist washing away by hot steam. The governor linkage benefits from a drop of light spindle oil at each pivot point. With proper care, this engine will remain a showpiece for decades.
Display and Integration with Other Engines
This Stuart No.9 is part of a larger collection that includes a Stuart Beam Engine, a Tangye, a Williamson, and several other notable models. When designing the display, it is worth considering how the engines relate to each other historically and visually. The horizontal mill engine represents the workhorse of the industrial revolution, while the beam engine harks back to the earlier era of atmospheric and condensing engines. Placing them side by side allows viewers to trace the evolution of steam power from the elegant, slow-moving beam to the compact, high-speed horizontal.
The planned boiler and burner arrangement for the No.9 should be integrated into a self-contained display that includes a water reservoir, a hand pump for boiler feed, and a steam separator to ensure dry steam reaches the engine. A small condensate tray beneath the engine will catch drips from the cylinder drains and valve chest. For safety, a pressure relief valve set to the boiler’s maximum working pressure is essential, and a pressure gauge should be clearly visible. These details not only enhance the educational value but also demonstrate a commitment to safe operation.
Visitors to the Steam Engines... A Gallery often ask about the practical aspects of running these models. The Stuart No.9, with its governor and reversing gear, offers a rich set of talking points. It can be run slowly to show the valve events, or opened up to demonstrate the governor’s regulating action. The engine is also an excellent candidate for video documentation, as the moving parts are all visible and the sound is distinctive. Sharing such videos online helps preserve the knowledge and enthusiasm for this rewarding hobby.
Future Enhancements and Upgrades
While Lou’s engine is already a masterpiece of machining, there are several enhancements that could improve its functionality and longevity. One consideration is the addition of a mechanical lubricator, which would automatically feed steam oil to the cylinder and slide valve. This is particularly useful during extended running sessions, as it eliminates the need to stop and manually oil the engine. A small displacement lubricator mounted on the steam line is a period-correct solution that adds visual interest.
Another potential upgrade is the installation of a steam pressure gauge and a throttle valve with a more ergonomic handle. The original Stuart throttle can be stiff, and a larger handwheel or lever would make fine adjustments easier. The governor could also benefit from a polished brass cover to protect the moving parts from dust when the engine is not in use. Such covers were common on full-size engines and add a touch of authenticity.
Finally, the boiler feed system deserves attention. The old-style square reservoir burners are efficient, but they require a separate water supply for the boiler. A hand pump with a check valve is the traditional method, and it can be mounted on the display base for convenience. For those who prefer automation, a small electric feed pump with a bypass valve can maintain water level without constant attention. However, purists will appreciate the simplicity and reliability of a well-made hand pump, which also provides a satisfying tactile connection to the engine’s operation.
In conclusion, the Stuart No.9 horizontal mill engine is a remarkable example of model engineering skill and a faithful tribute to the steam engines that powered the industrial age. Its combination of precise machining, functional governor, and elegant appearance makes it a standout piece in any collection. With thoughtful display, careful maintenance, and perhaps a few tasteful upgrades, it will continue to educate and inspire for generations to come.